DURALINE Z-100 INSTALLATION TIPS

Prepare a mortar mixer or similar mixing system that will thoroughly blend entire contents.  Temperature of Z-100 powder, the mixing water, and the surface to be protected should be 50 °F or higher. 70 °F is optimum.

DURALINE Z-100 Mixing Ratio: 13% water by weight
650 lb. drum
84.5 lbs. – 10.13 gallons water

Procedure for mixing DURALINE Z-100:
1. Make certain that ingredients (aggregate) are well distributed in drum.
2. Put required amount of water into mixer.
3. Add DURALINE Z-100 to mixer.
4. After adding all of the required Z-100 into mixer, continue mixing for 5 minutes. Use 5 minute mixing time on all batches to ensure uniformity.
5. Apply DURALINE Z-100.

If you’re NOT using an entire drum of DURALINE Z-100:

1a) Weigh quantity of Z-100 to be mixed.
1b) Measure corresponding amount of water needed.
1⁄2 drum Z-100 = 5.06 gal. Water